IIP1050_introduction.pdf
Characteristics |
Model |
IIP1025 |
IIP1050 |
IIP1100 |
Bandwidth(-3dB) |
25MHz |
50MHz |
100MHz |
Rise time |
14ns |
7ns |
3.5ns |
DC accuracy |
± 2% |
Ratio |
1/50,1/500 |
Input impedance |
Single end to GND:4MΩ
Between 2 input ends:8MΩ |
Input capacitance |
Single end to GND:7pF
Between 2 input ends:3.5pF |
Max differential input voltage |
1/50: 130V(DC + peak AC)
1/500: 1300V(DC + peak AC) |
Max common mode input voltage |
1000Vrms,CATⅡ
600Vrms,CATⅢ |
Noise |
1/50: ≤ 1.5mVrms
1/500: ≤ 1mVrms |
Linearity |
±1% |
Delay time |
20ns±1ns |
CMRR |
DC: ≥80dB
100kHz: ≥ 60dB
1MHz: ≥ 50dB |
Over range alert voltage |
1/50: 140V ± 4V(DC + peak AC)
1/500: 1400V ± 4 0V(DC + peak AC) |
AC adapter output |
DC9V,1000mA |
AC adapter input |
AC100~240V,50~60Hz |
Mechanical specification |
Input cable length |
~60cm |
Output cable length |
~90cm |
Jaw clip |
~85×40×13(mm) |
Tip |
~160×45×13(mm) |
Probe body |
120×55×24(mm) |
Weight |
160g |
Environmental characterics |
Operation temperature |
0~40℃ |
Storage temperature |
-10~45℃ |
Operation humidity |
85%RH |
Storage humidty |
90%RH |
Operation altitude |
3000m |
Storage altitude |
12000m |
Application illustration
■ Floating voltage measurement ■ High voltage isolation measurement
■ Switch mode power supply design ■ Inverter, UPS design
■ Welding , plating power supply ■ Transducer and its application
■ Lighting design ■ Motor driving design
■ Electrical lab and experiment ■ Low voltage equipment test
■ Electrical actuator test |